No additional digital Speed input programming

 100% seamless modification

 No external wiring to move

 Stop hunting for RSX Type S ECUs!

We modify each circuit board in-house so your 5-speed ECU works perfectly with a 6-speed transmission — including reverse lock — without any hassle or modifications.

 B2B Program Available

Are you a shop or dealer? We can supply and install ECUs/KPros that you can then sell directly to your customers.

 Fast, reliable, and professional service that saves you time and money.

 Blank ECUs Available
No ECUs on hand? No problem! We have ECUs ready to accept a KPro, saving you the hassle of searching and adding unnecessary complications.

---

Hondata KPro4 (Version 4) is a fully programmable ECU for 02-04 Acura RSX (DC5), 02-05 Honda Civic SiR (EP3), and any K Swapped vehicle. K-Pro is a must have to get maximum performance out of your k-series engine. The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any K-Series ECU, plus Windows software which allows you to re-program the ECU and datalog sensors.

If you have a 2005-2006 Acura RSX You will need to use a 02-04 RSX-S PRB ECU that is specially modified by Hondata to work with the 05-06 RSX Type-S electronics, along with a Hondata ECU jumper harness.

Compatible Core ECU's For K-PRO:

*PRB (A01-A12) 2002-2004 RSX Type-S
*PRC 2001-2006 RSX Type-R (JDM)
ALL RSX 2002-04 Manual and Automatic Transmission
ALL CR-V 2002-04 Manual and Automatic Transmission
ALL Civic SiR 2002-05 -Civic Type R EP3 PRD ecu number

Features

• USB connection for speed and compatibility
• KManager Windows based software for parameter and table editing, calibration uploading and datalogging.
• Many built in calibrations for common engine combinations
• Built in datalogging to a laptop
• On board datalogging memory (2 MB memory, 10-110 minutes datalogging)
• Adjustment for different sized injectors, with overall fuel trim.
• Configurable for any MAP sensor (to 5 Bar and above)
• TPS based table lookup for ITBs
• Engine protection from over boost and lean protection.
• Launch control with anti-lag
• Three multi purpose outputs for nitrous control or similar
• Supports lambda tracing from the stock wideband o2
• PWM output for boost control
• Most OBDII features may be disabled for race vehicles.
• Base tables are supplied for the RSX Type S, RSX Base, Civic SI and Integra Type R engines. These tables have been dyno tuned.

K-Manager Software Download

Optional : Denso - 02 sensor Primaire Acura RSX 2002-04